Seaward SafeCheck 8 - Manual (Page 23)

Performing Manual Tests
22
Leakage Test
This test should only be performed after ensuring that no
hazard will result from the product function e.g. spinning drill
etc.
Once the settings on screen are correct, press YES/START to
perform the test. Once the test is complete, the tester will return to
this screen to allow another test to be performed if required. If no
more tests are required for that product then press NO/ABORT at
this stage and the tester will return to the Manual Test Selection
menu.
When all testing is complete, press C or select complete and press
YES/START. The normal end of test options will now appear and
the procedure described in section 7 of the normal test process can
be followed.