Seaward SafeCheck 8 - Manual (Page 20)

Performing Manual Tests
19
Print Results
Selecting Print Results will cause the tester to print the results in the
current print format.
This setting will default to Roll Printer PASS / FAIL labels.
Performing Manual Tests
Manual mode provides the user with direct access to the tests. In
this mode individual tests can be selected and performed. This is
particularly useful where a product has unique test requirements
such as multiple Earth Bond test points.
Entering Manual Mode
After selecting New Test and entering a Product ID, use the Fast
key to select Manual Mode from the Select Test Settings menu.
The following menu will now appear: -
Press the appropriate key to select a test or use the cursor keys to
scroll to the test and press enter or YES/START.
----------MANUAL TEST SELECTION--------------
1. VISUAL CHECK
2. EARTH BOND TEST
3. SHORT TO CASE
5. FLASH TEST
6. LEAKAGE TEST
8. POLARITY TEST
C. TEST COMPLETE
S. SWITCH 110V / 240V