Seaward SafeCheck 8 - Manual (Page 25)

How to use Setup
24
Edit Test Settings
This allows the user to add, modify, remove or confirm test settings
that can then be selected during automatic testing.
Use the cursor keys to highlight a Test Setting and press Enter to
invoke the TEST SETTING EDITOR.
The TEST SETTINGS EDITOR will appear as shown below and will
allow changes to be made to the test sequence if required.
Use the cursor keys to highlight a field to be changed and press
Enter to select the desired option.
SELECT TEST SETTING
A. 240V CLASS 1
B. 240V CLASS 2
C. 240V POWER CORD
D. 110V CLASS 1
E. 110V CLASS 2
---------------------TEST SETTINGS EDITOR-------------------
OUTPUT LIMIT DUR NUM
SOCKET 230V
VISUAL YES 1
EARTH BOND 25A ∼ 0.10Ω 5s 1
SHORT LINE SKIP
FLASH SKIP
LEAKAGE 110V ∼ 0.75mA 5s 1
POLARITY SKIP
NAME: DOUBLE INSULATED
OK