Seaward SafeCheck 8 - Manual (Page 33)

How to use the Memory
32
Once the PERFORM MEMORY TEST option is highlighted press
the enter button.
The memory test checks all of the appliance results against their
checksums. If the test passes then no action is taken. If the test
fails then the Memory checksum requires updating. Use the cursor
keys and press Enter to choose an action if corrupted tests are
found.
Delete Single Appliance
Enter the Appliance number to delete a single appliance and press
Enter.
A warning ‘Are You Sure?’ prompt will appear. Press the No Fast
key to return to the previous menu or press the Yes Fast key to
perform the delete operation and return to the previous menu.
Clear Results Memory
This option will delete the entire test results currently stored in
memory and should be used carefully!
A warning ‘Are You Sure?’ prompt will appear. Press the No fast
key to return to the previous menu or press the Yes fast key to
perform the clear operation and return to the previous menu.
---DELETE SINGLE APPLIANCE--
-