Seaward 220 PrimeTest - Manual (Page 10)

Operating Instructions
Primetest 220
3
The tester and all associated cables and leads
must be checked for signs of damage before
the equipment is operated.
Attention! During and Class I and Class II tests,
high voltage levels occur within the
PrimeTest 220.
Where safe operation of the tester is no longer possible,
it should be immediately shutdown and secured to
prevent accidental operation.
It must be assumed that safe operation is no longer
possible:
- if the instrument or the measuring leads show visible
signs of damage, or
- the tester does not function, or
- after long periods of storage under adverse
environmental conditions.
Important
- Do not touch the bare probe tips of the
measuring lead.
- Ensure the black measuring lead is plugged
into the corresponding black socket on the
PrimeTest 220
- Do not operate the PrimeTest 220 in an
explosive gas or dust environment.
3.0 Accessories
3.1 Standard Accessories
The PrimeTest 220 is supplied with the following items:
3.1.1 1 off PrimeTest 220
3.1.3 1 off 1.2 M test lead black
3.1.5 1 off alligator clip, black
3.1.6 1 off mains cord
3.1.7 1 off professional carry case
3.1.8 6 off alkaline batteries 1.5 AA size LR6
3.1.9 1 off operating instruction manual
PrimeTest 220 REV 1 5/12/05 1:52 pm Page 8