RJS Inspector D4000 Laser (FIRMWARE version A.05 and Earlier) - Manual (Page 27)

Operator ’ s Guide Model L1000 Laser Inspector TM
002-5568 RJS, Minneapolis, MN 21
Table 1 (Code Identifiers Laser Inspector )
Displays Type
LOGMARS Code 39 Symbology
AIAG B-1 Code 39 symbology
AIAG B 3/4/5 Code 39 symbology
ANSI 3 of 9 Code 39 symbology (AIM Spec.)
HIBC 3 of 9 Code 39 symbology
3 of 9 w/43 Code 39 symbology
ANSI I 2 of 5 Interleaved 2 of 5
Case Code Interleaved 2 of 5
Codabar Variant Codabar (AIM Specification)
Code 93 Code 93 (AIM Specification)
Code 128 Code 128 (AIM Specification)
128 Case Code UCC 128, AI 00
X - Y % UPC-A Uniform Product Code, Ver. A
X - Y % UPCA+2 Uniform Product Code, Ver. A with 2 digit addendum
X - Y % UPCA+5 Uniform Product Code, Ver. A with 5 digit addendum
X - Y % UPC-E Uniform Product Code, Ver. E
X - Y % UPCE+2 Uniform Product Code, Ver. E with 2 digit addendum
X - Y % UPCE+5 Uniform Product Code, Ver. E with 5 digit addendum
X - Y % EAN-13 European Article Number 13 digit
X - Y % EAN13+2 European Article Number 13 digit with 2 digit addendum
X - Y % EAN13+5 European Article Number 13 digit with 5 digit addendum
X - Y % EAN-8 European Article Number 8 digit
X - Y % EAN8+2 European Article Number 8 digit with 2 digit addendum
X - Y % EAN8+5 European Article Number 8 digit with 5 digit addendum
Note: (Previous Tables) All ANSI symbologies are traditional specifications using bar width deviation. X
and Y represent the magnification range selected for UPC/EAN tolerances.