RJS Inspector D4000 Laser (FIRMWARE version A.05 and Earlier) - Manual (Page 21)

Operator ’ s Guide Model L1000 Laser Inspector TM
002-5568 RJS, Minneapolis, MN 15
5.3 Storage
Storage is used to hold scan data for future print or review. Up to approximately 75 barcodes
may be held in storage.
From the main menu press Enter and Select at the same time the following will be dis-
played.
Scan Setup
Database/Storage
Select Database and press Enter
The display will show either “Storage Inactive” or “Storage %.”
Database Empty
Storage Inactive

Store and Print is inactive
Scan Setup
Storage XX%

Store and Print is active

If a % is displayed, it represents the percentage of the buffer that is filled with
scan data.
You may enable or disable Store and Print by pressing Enter with the cursor on Storage.
(Toggle from one option to the other.)
When Storage is active, press Select to move the cursor to the % sign. Press Enter on the %
sign to clear the Store and Print buffer.