RJS Inspector D4000 Laser (FIRMWARE version A.05 and Earlier) - Manual (Page 16)

Model L1000 Laser Inspector TM Operator ’ s Guide
RJS, Minneapolis, MN 002-5568 10
5.2 Setup
Select Setup (from the Main Menu) to set various system parameters:
D/bility Warning
D
Select an ANSI decodability grade to use in your analysis (See Appendix G for an explana-
tion of the grades.)
A warning message will be produced for the selected grade or any lower grades:
B C D F NONE

Press Select to scroll the choices for warning threshold grade

Press Enter to initiate processing for that option
If NONE is selected, the decodability grade will not be used to trigger a warning message.
However, the decodability grade will be calculated and available for viewing.
The next selection allows selection from a range of UPC/EAN symbol magnifications:
UPC/EAN tol.
90 - 115% Mag.
The magnifications selections are:
(See Appendix D for an explanation of magnifications.)
80 - 89 % Mag
90 - 115 % Mag
116 - 150 % Mag
151 - 200 % Mag