RJS Inspector D4000 Laser (FIRMWARE version A.05 and Earlier) - Manual (Page 25)

Operator ’ s Guide Model L1000 Laser Inspector TM
002-5568 RJS, Minneapolis, MN 19
6.0 Scanning Symbols
To scan a barcode simply pull the trigger and position the beam across the symbol. A crisp,
clear chirp (or beep) sound will indicate a good read. See Appendix H for details.
Decoded data and symbology type will display:
*01928374*
ANSI I 2 of 5
Press Enter to navigate to the Pass/Fail Analysis screen, then begin pressing Select to scroll
through the analysis screens.
ANSI I 2 of 5
Acceptable
(See Pass/Fail Analysis Screen section)