How to load the saved input and output channel, System setup and operations – RGBLink DXP D1616 User Manual User Manual

Page 64

6. System Setup and Operations

How to Load the Saved Input and Output Channel

DXP D1616 User Manual 64

1. Push the [LOAD] button on the front panel, the button light is on. At the

same time, some buttons [1]~[16] in output and input area are on and

some flash. Button on is ready for recall, and button flashes means just

recall, shown as follows:

2. Push the button on to recall.

3. Push the [MENU] button to exit the load state, or push the [LOAD]

button, the button light is off, and exit the load state.

LOAD FROM: _