Save/load user mode, Information toolbar, Communication software guideline – RGBLink DXP D1616 User Manual User Manual

Page 47

5. Communication Software Guideline

Software Operation

DXP D1616 User Manual 47

If need to set one input to all outputs, for example, set input 1 to 16 outputs,

click input channel 1 in Input area, then click ―All‖ in Output area, all outputs

will switch to input 1.

Save/Load User Mode

DXP D1616 provides 24 kinds of save modes. User can save the

parameters in Save User Mode area, and load the saved parameters in

Load User Mode area.

Information Toolbar

It shows the connect status, software version, and so on.