RGBLink DXP D1616 User Manual - Manual (Page 63)

6. System Setup and Operations
How to Save the Preset Input and Output Channel
DXP D1616 User Manual 63
How to Save the Preset Input and Output
Channel
1. Push the [SAVE] button on the front panel, the button light is on. At the
same time, some buttons [1]~[16] in output and input area are on and
some flash. Button is on can be saved, and button flashes will be
overwrite, shown as follows:
2. Choose the button on to save, the LED screen will show save complete.
For example, the button [3] on output area is on, push the button, the
LED screen will show as follows:
3. If choose the button flash, the information saved before will be overwrite.
For example, the button [1] on output area is on, push the button, the
LED screen will show as follows:
Push the [TAKE] button to confirm, and push [MENU] button to cancel.
4. Push the [MENU] to exit the save state, or push the [SAVE] button, the
light is off, and exit the save state.
Note
The buttons [1]~[16] on output area corresponding to
save 1~16, and the buttons [1]~[16] on output area
corresponding to save 17~32.
SAVE TO: 3
SAVE 3 COMPLETE!
SAVE TO: _
2 USED, OVERWRITE?
—>NO YES