RGBLink DXP D1616 User Manual - Manual (Page 24)

2. Hardware Orientation
DXP D1616 Front Panel
DXP D1616 User Manual 24
DXP D1616 Front Panel
Brief introduction of DXP D1616 front panel as the following picture:
The front panel consist of LED screen, indicator, IR receiver and buttons,
the button is for control command inputting, the LED screen is composed of
128*16 points, and used to display the operation and running state, the
indicator shows the operating status.
LCD Panel
Used to display the current status and prompting message.
Plug into the power cord and push the power button to ―ON‖, the LCD
module on the front panel will show RGBLINK and go into self verification.
For the first setup, it is default for factory setting. With front panel keyboard,
user can operate DXP D1616 through the menus on LCD panel.
DXP D1616 front panel as shown in figure:
Indicator
Power: The red power indicator is on when there is power supply.
Mode: When switch audio and image at the same time, the yellow mode
RGBLINK
DXP D1616
123456789ABCDEFG
123456789ABCDEFG