How to connect windows control program by rs232, Interface, Communication software guideline – RGBLink DXP D1616 User Manual User Manual

Page 48

5. Communication Software Guideline

How to Connect Windows Control Program by RS232 Interface

DXP D1616 User Manual 48

Firstly, install the control software in your PC.

Connect one end of RS232 cable to the DXP D1616, and the other end to

the serial port on the PC.

If there is no serial port in the PC, it needs the Serial to USB adapter.

Right click [My Computer] on the home screen of control PC. Enter to

[Attribute], Find [Hardware] option, as following.

Click [Device Manager] ―+‖ on the left, check the COM number, as following,

COM1 is offered.