RGBLink DXP D1616 User Manual - Manual (Page 46)

5. Communication Software Guideline
Software Operation
DXP D1616 User Manual 46
, then it will search the cascade device, and will display the machine
address of one device on the page. Left click ―4‖ and enter to the widows
control program page, user can operate on this page.
Input and Output Signal
Support 16 kinds of input signals, and each input corresponding to different
colors.
Click input channel 1 in Input area, and click output channel 1 on Output
area, then the color of output channel 1 will corresponding to the color of
input channel 1.
User can also set one input to more outputs. Click input channel 1 in Input
area, and click output channel 1, 2, 3 in Output area, output 1, 2 3 will output
signal 1, and the color of output channel 1, 2, 3 will corresponding to the
color of input channel 1.
If need to close one output signal, for example, close output 3, click ―0‖ in
Input area, then click ―3‖ in Output area, output 3 is closed, and turn to
original gray.