How to switch between input and output channel, System setup and operations – RGBLink DXP D1616 User Manual User Manual
Page 51
6. System Setup and Operations
How to Switch between Input and Output Channel
DXP D1616 User Manual 51
How to Switch between Input and Output
User can switch the signals between input and output channel by front
panel buttons of DXP D1616, specific operations are as follows:
1. If choose ―AUTO TAKE ON‖, push any button on output area in the
front panel, for example, choose [5] as the output channel.
Then push any button on Input area in the front panel, for example,
choose [3] as the input channel, the signal of output channel 5 will be
switched to the signal of input 3.
2. If choose ―AUTO TAKE OFF‖, push any button on output area on the
front panel, for example, choose [5] as the output channel.
Then push any button on input area on the front panel, for example,
choose [3] as the input channel.
After setting, push the [TAKE] button to confirm.
O:1234
5
6789ABCDEFG
I :123456789ABCDEFG
O:1234
5
6789ABCDEFG
I :123436789ABCDEFG
O:1234
5
6789ABCDEFG
I :123456789ABCDEFG
O:1234
5
6789ABCDEFG
I :1234
3
6789ABCDEFG
O:1234
5
6789ABCDEFG
I :123436789ABCDEFG