RGBLink DXP D1616 User Manual - Manual (Page 60)

6. System Setup and Operations
How to Realize Signal Auto Take
DXP D1616 User Manual 60
How to Realize Signal Auto Take
1. Push the [MENU] button on the front panel, and enter to the menu items.
2. Push the [MENU] up arrow button or [NEXT] down arrow button, and
choose [AUTO TAKE].
3. Push the [TAKE] button to confirm, and enter to the auto take setting.
Push the [NEXT] button to choose ―ON‖ or ―OFF‖, then push the [TAKE]
button to confirm. System default the status is ―ON‖, and when switch the
signal, user need not to push the [TAKE] button.
—>STATUS >>
RESET >>
HOT BACKUP >>
—>AUTO TAKE >>
AUTO TAKE
OFF —>ON