How to set the edid, System setup and operations – RGBLink DXP D1616 User Manual User Manual

Page 56

6. System Setup and Operations

How to Set the EDID

DXP D1616 User Manual 56

1. Push the [MENU] button on the front panel, and enter to the menu items.

2. Push the [MENU] up arrow button or [NEXT] down arrow button, and

choose [EDID].

3. Push the [TAKE] button to confirm.

4. Push any button on output area on the front panel, for example,

choose [3] as the output channel.

5. Push any button on Input area on the front panel, for example,

choose [5] as the input channel.

6. Push the [TAKE] to confirm, and the EDID copy finish.

Note

When set the EDID, the output interface must be

connected to monitors.

FROM:
TO:

—>STATUS >>
RESET >>

LOGO >>
—>EDID >>

FROM: 3
TO:

FROM: 3
TO: 5