Communication software guideline – RGBLink DXP D1616 User Manual User Manual

Page 49

5. Communication Software Guideline

How to Connect Windows Control Program by RS232 Interface

DXP D1616 User Manual 49

Remember the COM you are using and then run the control software, find

[Communication] option. System default for the first time, user have to click

button, as following:

Check and tap [Serial], Serial Port , for example, is COM1 which is checked

from device manager. Set DXP D1616 Boud Rate to be: 9600, Click

[Confirm] after setting.

Click

[open serial], check if [COM] icon is on the bottom right corner,

when there is the prompt green showing on the software, it means the

communication is ok , and you can use the software to control the device

now.