RGBLink MVP 320 User Manual - Manual (Page 59)

MVP 320 User Manual 59
Solve the problem:
1. Suggest use the signal extension to make sure the minimum wire damage.
2. Adjust the input signal function definition and use the good wire line.
6. Uncompleted picture in the display equipment and the dark edge appeared.
Cause: 1. The display equipment has down the back cutting to signal.
2. Too much adjustment to the images through the controlling software.
Solve the problem:
1. Adjust to the default setting in the software according to the equipment instructions;
2. Re-adjust the picture location by the controlling software to get the expected effects.
Instruction of this manual
《RGBlink processor instruction manual》 is only used as the user’s guide. Because of the
continuous updating of the software edition, the practical situation will differ from the
manuals, and our company will make writing instructions according to the practical
situation.