RGBLink MVP 320 User Manual - Manual (Page 56)

MVP 320 User Manual 56
color, background is the original image; 3 is the accumulating bit, and the bit is the front
color, and the background is the back color.
Front_color is the front view color
Back_color is the background color.
The space size of the bit is fixed as 512x32; when setting the bit, make sure the bit zone
is within the image zone.
For example：if the input resolution is 1024x768, then the vertical starting place cannot
exceed768-32,and the horizontal starting place cannot exceed 1024-512。
The size of the bit cushion area is 2048 bits; each bit represents a pixel, 512x32 in total.
23. Set the time instruction
For example
Set the time as Nov 21, 2011, Fri, 16:12:56
24. Read the time instruction
25. Set the base map enable instruction
screen_id is the split joint screen number.
Bk_en 0：Close the base map,1, and open the base map.
flash_base: is the page address of the base map at flash, one page is 2048 bytes.
pic_hsize: the horizontal size of the base picture.
pic_vsize: the vertical size of the base map.
26. Set the type of the input source
in_ch, is the input channel number, one to the maximum input scale.
Mode, to the VGA input card, mode 0 means the VGA input mode, 1 or 2 means the
YPbPr input mode.