RGBLink MVP 320 User Manual - Manual (Page 42)

MVP 320 User Manual 42
Two ways can change the size and location of the opened window：
a、drag and drop the opened window by mouse. The details are: move the mouse to
the lower right brink of the opened window, when the mouse shows‖<—>‖, press the
left key of the mouse and drag the window to a suitable size and then release the
mouse. Move the mouse to the opened window and press the left key of the mouse
and move the mouse, then the window will be moved, release the mouse when
moved to the suitable location. But this method can only adjust the size and location
roughly; if an accurate adjustment is needed, the second method can be used.
b、put the mouse on the window to be adjusted, right click the mouse. Select the
―property‖ and the exemplary interface will appear, adjust precisely by ―location‖ and
―length‖.
About the input source type, if we use DVI or video to input, then use directly. If
choose the VGA to input, the below interface will be shown. Under usual
circumstance, the user needs not to adjust or do some micro adjustment to the ―left
starting location‖ and the ―up starting location‖; the other parameters adjustment is
not sugge sted. If the users adjusted the parameters by mistake, they can click ―reply
default-
confirm‖ and can recover the default setting when reopening.
Right click the window, select the window property setting to set the location, size and