Dvi/vga output signal, Utp output signal – RGBLink MVP 320 User Manual User Manual
Page 30

MVP 320 User Manual 30
Connector RJ45/ Female connector
9. DVI/VGA output signal
Qty. 4 to 72 way DVI / RGB signal
Type RGB(Analogue)/DVI(Digital)
Resolution
800x600,1024x768,1280x720,1280x800,1280x1024,1360x768,1366x768,1440x900,140
0x1050,1600x1200,1680x1050,1920x1080,1920x1200 Pixels(The user can add output
resolution by him or herself by using control software), refreshing frequency is 60Hz.
Depth of color 32 bit / Pixels
Type of synchronization separate horizontal and vertical synchronization;
Maximum output distance 25 meters, 1920×1200@60Hz(It is recommended to use the
certified DVI special cable)
Connector DVI: 24+5 pin DVI-I(Female connector)
RGB: 15pin D-Sub(Female connector)
10. UTP output signal
Qty. 4 to72 way DVI / RGB signal
Type RGB(Analogue)/DVI(Digital)
Resolution
800x600,1024x768,1280x720,1280x800,1280x1024,1360x768,1366x768,1440x900,140
0x1050,1600x1200,1680x1050,1920x1080,1920x1200 Pixels(The user can add output
resolution by him or herself by using control software), refreshing frequency is 60Hz
Depth of color 32 bit / Pixels
Maximum output distance 100meter, 1920×1200@60Hz;(It is recommended to use
CAT-6 STP/UTP)
Connector RJ45/ Female connector