RGBLink MVP 320 User Manual - Manual (Page 20)

MVP 320 User Manual 20
2. Instructions for Safe Using
1．Power Supply
Please use single-phase three-wire AC 220V power with protection, and
please ensure that the entire engineering systems are grounded, such as
Power not grounded should not be used. The grounding pin of the power
cable should not be damaged.
2．Power Off
If it is necessary to move the equipment or carrying other workings that
need to cut off the power, the power should be turned off to ensure the
safety of the equipment.
3. Cable
Placing articles on the power, signal or communication cables are
prohibited. Stepping on or compressing the cable should be avoided, so as
to avoid the dangerous situation such as power leakage or short circuit etc.
The equipment only can be started for operation after ensure that the
signal and communication cables etc have been connected.
4. Radiation
The surface holes on the equipment for radiation should not be blocked,
so as to prevent heat accumulation which will result in damages to the
equipment.
5. Environment
The operation environment of the equipment should be dust-proof,
moisture proof and liquid immersion proof.
6．Maintenance
All the maintenance work should be carried out and completed by
professional staff. Without permission, private maintenance is not allowed
to avoid that electric shock occurs.