RGBLink MVP 320 User Manual - Manual (Page 36)

MVP 320 User Manual 36
Click ―Channel Mapping‖ in the ―Main function area‖.
After setting splicing, ―Reset‖ must be clicked, which may take some time and progress
bar will appear during the course, click ―Confirm‖ after finished.
Set the mode of monitor: ―Advance timing‖ can change various parameter value of
output screen, click ―Application‖ after changing. If you want to restore the default
parameter value, please click ―Restore‖.
8. Display and setting of combined screen
If you want to check and read the information of other combined screen and open window
interface as follows.
After clicking ―Splicing wall 2‖, the combination type 2X4 of splicing set 2 can be displayed