RGBLink MVP 320 User Manual - Manual (Page 51)

MVP 320 User Manual 51
This instruction means to call the saved scene.
a：Scene_id means the number of scene to be saved is from 0 to 31, 32 scenes can be
saved to the most.
For Example：
This instruction means to call the 5
th
scene.
Return value：Scene_id_error：Means this ID is beyond the range.
No Scene：Means the scene does not exist or the data is wrong.
OK：Means the instruction operates successfully.
8. Top or bottom placing the window instruction:
W_ID means the number of window.
Z, 0 means top placing, 1 means bottom placing.
For example：
This instruction means to place window 1 on top.
9. Close all the windows on the split joint screen：
Screen_ID, the split joint screen groups to be closed, the split joint screen is
（first group）,1（second group）,2（third group）,3（fourth group）
For example：
This instruction means to close the split joint group 1.
10. Read the parameter instructions input channel:
This instruction means to read the parameter of the input card.
a：SourceChl means the input channel of signal source; the range is from 1 to the input
scale.
After executing the order, a group of parameters will return in the below way:
contrast,bright,freq,phase,de_left,de_right,de_top,de_bottom
This respectively means the contrast of the VGA sampling, brightness, frequency, phase,
left starting place, right ending place, up starting place, down ending place.