RGBLink MVP 320 User Manual - Manual (Page 48)

MVP 320 User Manual 48
Dis_freq_l： fractional part of the pixel timing X65536
Hsync_pol：the horizontal simultaneous pole
Vsync_pol：the vertical simultaneous pole
The instruction set can display the format information.
For example：
1. //1024x768
2. //1280x1024
3. //1360x768
4. //1400x1050
5. //1440x900
6. //1600x1200
7. //1680x1050
8. //1920x1080
9. //1920x1200
10. //1280x720
3. Output screen open window instruction：
W_ID,SourceCh,src_hstart,src_hsize,src_vstart,src_vsize,x0,y0,x1,y1>
This instruction means the input signal source is on the output screen.
Screen_ID means opening window on the split joint screen, the split joint screen is 0（first
group）, 1（second group）, 2（third group）, 3（fourth group）
W_ID means the ID number of the window, the range is 0-65535, and this is the only
signed window.
SourceCh means the signal source of the window; the range is from 1 to the largest
output.
src_hstart means the horizontal intercepted starting point of the input signal source. It
cannot be larger than the input horizontal resolution.
src_hsize means the horizontal intercepted size of the input signal.
Note： src_hsize plus the src_hstart cannot be larger than the input horizontal resolution.
0 means the horizontal size of using the original signal source, and it is invalid to use