RGBLink MVP 320 User Manual - Manual (Page 26)

3. Production Introduction
Function Characteristics
MVP 320 User Manual 26
4. Image segment function
All the input signals can be cut off freely, so as to realize some functions such as enlarging
in part, removing the black edge of the video image and adjusting VGA sampling position
etc.
5. Support multi-groups screen control
RGBlink processor can set four groups of combined screens, each group of combined
screen can set resolution and be switched independently and individually.
6. Base maps with 65535*65535 ultra-high resolution
Base maps can be set for each group of screen independently, and multi-base map can
be displayed on self-defined combined screen, the base map is in 24Bit bmp format.
7. Support 32 groups of scenes saving and automatic inquiry
in turn
Each group of screen shaking of RGBlink processor support scene saving, and inquiry in
turn can be set on the software.
8. Support input signal supervision
RGBlink processor support input signal frequency doubling and upscaling, which can
supervise, check and display, at real time, that whether there’s signal connected into
various input channels.
9. Support HDCP 1.3
HDMI input card of RGBlink processor support HDCP 1.3, which can connect with
portable computer and blue-ray DVD HD signals etc.
10. Output resolution can be self-defined for each channel
Different output resolution cab ne configured to each channel by using software to meet
the requirements on input signal’s resolution of various types and groups of monitors.
Compared with the matrix on the market which only can set one type of resolution, its
application flexibility is higher and suitable for the project which requires resolution