REMKO ATY 261 DC - Manual (Page 8)

A symbol is shown on the display to indicate that the settings are being transferred.
Button functions
By pressing the ON / OFF button, you can activate or deactivate your
unit. The programmed settings and adjustment values before the unit
was turned off will appear on the display. ON/OFF Button
ON/OFF ON/OFF
 /  Button The remote control has its own temperature display. If buttons  /  are
pressed alternately, the display changes to . The button  can be used
to reduce the desired nominal temperature, the  button can be used
to increase it. This adjustment is only possible in coolingand heating
mode. In automatic mode, the fixed temperature of 24°C is preset.
The current setting is shown next to the temperature display.
In dehumidification mode, no temperature adjustment can be made.
Cooling / heating
mode
  
MODE Button Use the MODE button to select between the individual operating modes.
5 modes are available:
1. Automatic automatic selection of cooling or heating operation
2. Cooling predominantly summer operating mode
3. Dehumidification Summer or winter operating mode
4. Heating predominantly winter operating mode
5. Air circulation only for circulation of air
MODE
Automatic Cooling Heating Air circulation Dehumidifying
MODE MODE MODE MODE
REMKO ATY
8