REMKO ATY 261 DC - Manual (Page 14)

By pressing the "ION" button several times, the "ION" function,
the "Turbo" function, or both can be set at the same time.
Ion function
The unit is equipped with an ion generator to generate negative ions.
A high concentration of negative ions is found for example in mountains,
near waterfalls and in forests and people perceive this inhaled air as
"clean". Only a slight ion concentration is found in interior rooms. In this
case, the ion generator can enhance the ions to the oxygen molecules
of the surrounding air and can increase the feeling of well-being. In
addition, atmospheric particles and dust particles in the air are bound,
naturally cleaning the air. Any dust can settle on smooth surfaced due
to the ionization and can be removed manually. Weekly cleaning of the
housing and the filter should be observed when using the ionization
feature. The function is available in all operating modes.
Turbo function
With this button, the air volume flow in cooling and heating operation
is increased for 30 minutes. This makes it possible to cool off or warm
up a room quicker. The ventilation and dehumidification mode cannot
be obtained, the system changes to automatic mode.
After 30 minutes, the controller returns to the last programmed settings.
INDOOR UNIT DISPLAY
C
TURBO
SET
C
TURBO
SET
REMKO ATY
14