REMKO ATY 261 DC - Manual (Page 13)

PROGRAMMINGTIMER ON
PROGRAMMING TIMER ON/OFF
The controller turns the unit on or off after programming. In operation,
all settings are visible on the display. Out of operation, only the timer
settings are visible.
The controller turns the unit off after programming. During operation,
all settings can be seen on the display. Out of operation, only the timer
settings are visible.
The controller turns the unit on after programming. During operation,
all settings can be seen on the display. Out of operation, only the timer
settings are visible.
PROGRAMMING TIMER OFF
Timer on
HR/MIN 30 sec.
Timer off HR/MIN 30 sec.
Unit On Unit Off
Example:
The controller turns on at 10:20.
The unit is in operation until 05:00.
13