REMKO ATY 261 DC - Manual (Page 7)

"MIN."button
This button increases the
minute value for time and timer
programming.
"CLOCK"button(recessed)
By pressing this button, the
time setting is activated.
"ION" button
By pressing this button, the ion
generator and turbo mode are
activated.
"TIMER OFF" button
This button serves to program
the automatic switch-off time
for the unit within the next 24
hours.
"RESET" button
(recessed)
This button resets the remote
control to its factory default
configuration.
3. Heating mode In this mode,
the warm air in the room
is warmed to the desired
temperature.
4. Air circulation mode
In this mode, the air in the room
is recirculated.
5. Dehumidification mode
In this mode the room is mainly
dehumidified and the adjusted
temperature is maintained.
"FAN" button
Press this button to set the
desired fan speed. 4 speeds
are available: Automatic, high,
medium and low fan speed.
"(SLEEP)" button
After pressing this button,
the Sleep mode is activated
and in cooling operation, the
nominal temperature increases
automatically by 1 °C within
an hour, in heating operation,
the nominal temperature is
lowered by 1 °C within an
hour.
After the second hour,
the temperature is increased/
lowered by 2°C. After 6 hours,
the function is switched off.
"(SWING)"button
This button directly activates
the oscillating function of the
fins for better air distribution
in the room.
"TIMER ON"button
This button is used to
activate the automatic on and/
or off time of the unit and
is programmed with buttons
and at intervals of 10
minutes.
"HR"button
This button increases the
hour value for time and timer
programming.
Buttons on the remote control
Buttons on the remote control
"ON/OFF" Button
Press this button
to start the unit.
"  "button
This button is used to set
the desired temperature
between 18°C and 30°C.
"MODE"button
Use this button to select the
operating mode. The indoor unit
has 5 modes:
1. Automatic mode
In this mode, the unit works in
cooling or in heating mode.
2. Cooling mode
In this mode the cold air in the
room is cooled to the desired
temperature.
7