OpenEye D4000 - Manual (Page 6)

6
NOTES ON MOISTURE CONDENSATION
Moisture condensation could damage the tester. Read the following information carefully.
Moisture condensation might occur under the following circumstances:
•
When this product is brought directly from a cool location to a warm location.
•
When this product is moved to a hot and humid location from a cool location.
•
When this product is moved to a cool and humid location from a warm location.
•
When this product is used in a room where the temperature fluctuates.
•
When this product is used near an air-conditioning unit vent.
•
When this product is used in a humid place.
Do not use the tester when moisture condensation may occur.
If the tester is used in such a situation, it may damage internal parts. Remove the power cord
of the tester from the wall outlet, turn off the tester, and leave it for two to three hours. After
two to three hours, the tester will warm up and evaporate any moisture. Keep the DVR
connected to the wall outlet and moisture will seldom occur.
WARNING
TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.
DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN