2 snmp – Niveo Professional NGS16TP User Manual
Page 83

79
NIVEO PROFESSIONAL Gigabit Management Switch
User's Manual
6.4.2 SNMP
This function is used to configure SNMP function of the switch. This switch supports
SNMP v1, v2c, and v3 agent function and MIB II(Interface), Bridge MIB, 802.1Q MIB and
Private MIB.
[System Information]
Object ID: this is the SNMP Object ID of the switch for SNMP management.
Up Time: this is the power-up running time of the switch.
Version: this is used to select SNMP agent operation version.
Name: this the host name of the switch.
Contact: this is the contact information for the switch.
Location: this is the location information of the switch.
[SNMP -- Communities]
Get: this is the community string of GET command for SNMP operation. GET command is
used to read switch configuration/information.
Set: this is the community string of SET command for SNMP operation. SET command is
used to set switch configuration.