Niveo Professional NGS16TP - Manual (Page 21)

17
NIVEO PROFESSIONAL Gigabit Management Switch
User's Manual
If the settings are for ports, it is done with “interface ethernet 1/x” command in
configure mode. And the prompt will become “(config-if)#”. For example, “interface
ethernet 1/5” is for settings on Port 5.
If the settings are for VLAN group, it is done with “interface vlan x” command in
configure mode. And the prompt will become “(config-if)#”. For example, “interface
vlan 100” is for settings on VLAN 100.
4. VLAN Configuring Commands
If the settings are general VLAN settings, it is done with “vlan database” command in
configure mode. And its prompt will become “(config-vlan)#”.