NewTek 3Play 330 - Manual (Page 53)

Page 47
6.2.9 JOG/SHUTTLE
12) Jog Wheel/Shuttle Ring (Figure 27): Twist the outer ring
clockwise or counter-clockwise to quickly shuttle back
and forth through the video stream(s) on output. The
video will stop at the selected point on release.
Similarly, use the inner jog wheel to ‘dial up’ a different
frame with one fingertip.
The Jog Wheel moves the current frame position forward
and backward in the active event with frame precise
accuracy. Twisting the Shuttle Ring allows you to swiftly
scan backwards or forwards in time.
(The scan rate increases or decreases as you apply more or
less rotation to the ring.)
As you would expect, Jog/Shuttle actions affect all video output streams simultaneously. After a
jog operation, pressing Play would resume playback from the current frame (respecting the
established Speed setting).
In LIVE playback mode, the operator can only Jog/Shuttle backwards of course (3P LAY does not
currently support Future Playback mode – please see Relativity: The Special and the General
Theory, by Dr. A. Einstein).
Jogging during LIVE output engages Delayed playback mode.
Note: Jog/Shuttle actions during LIVE playback can only be performed when Record is enabled.
6.2.10 SELECT AND MANAGE
The buttons in this group
Figure 28) permit you to select (and multi-select) events in their lists, clone and remove them.
Figure 27