NewTek 3Play 330 - Manual (Page 33)

Page 27
5.2 CONFIGURING INPUTS
Figure 13
3P LAY needs to know what sort of video sources are connected to it. Click the gear icon (Figure 13)
next to the Close button in the upper-right corner of the 3P LAY Desktop. This opens the I/O
Configuration panel (Figure 14).
Figure 14
Use the Video drop-down menu to identify your sources by connection type, choosing between Composite,
Y/C, Component or SDI (Composite and Y/C options are shown in the menu for Standard Definition sessions
only).
Click the LIVE button on the 3P-10 control surface (note that 3P LAY will automatically begin a/v
recording). If you have connected one or more video sources to 3P LAY and at least one monitor
connected on output, you should now see one of the source video streams on your external output
monitor.