Measurement Computing CIO-DAS16 - Manual (Page 8)

Table 1-1. Range Select Switch Positions
SEE EQUATION 0.5 < USER < 20 L L L L R
0.244mV / bit 0 to 1V +/- 0.5V 10 R L L R L
0.488mV / bit 0 to 2 V +/- 1V 5 R L R L L
1.22mV / bit 0 to 5V +/- 2.5V 2 R R L L L
2.44mV / bit 0 to 10V +/- 5V 1 R L L L L
4.88mV / bit N/A +/- 10V 0.5 L L L L L
RESOLUTION UNIPOLAR
S6=LEFT
BIPOLAR
S6=RIGHT
GAIN S5 S4 S3 S2 S1
In the above table R = right and L = left.
S6, the top switch, controls a relay that switches the range between unipolar and bipolar.
Set the switches as desired or leave them at the factory setting of +/- 5 volts.
It is not necessary to turn off the PC power or disconnect signals when changing these switch settings.
4