Measurement Computing USB-1602HS-2AO - Manual (Page 39)

USB-1602HS-2AO User's Guide Specifications
39
Table 4. SINAD (signal to noise and distortion) performance, note 2
Range Typical SINAD, dB
±10 V 84
±2.5 V 82
±500 mV 77
Note 2: Calibrated and measured with a 10 kHz signal at 0.95 FSR, at the maximum sampling rate.
Table 5. ENOB (effective number of bits) performance, note 3
Range Typical ENOB, Bits
±10 V 14
±2.5 V 13
±500 mV 13
Note 3: Calibrated and measured with a 10 kHz signal at 0.95 FSR, at the maximum sampling rate.
Table 6. SFDR (spurious-free dynamic range) performance, note 4
Range Typical SFDR, dB
±10 V 95
±2.5 V 95
±500 mV 95
Note 4: SFDR is measured at the maximum sampling rate.
Analog output
Table 7. Analog output specifications
Parameter Conditions Specification
Number of channels Two independent
Resolution 16-bits
Output range ±10 V
Throughput Two channel 1 MS/s each channel
Pacer sources
 Internal pacing
 External pacing
 Pacing slaved to analog input pacing
See Table 12 for additional information.
Monotonicity 16-bits
Glitch energy < 12 nV/s
Current output ±5 mA maximum
Output coupling DC
Power up state DACs clear to midscale, (0 V, ±20 mV)
Output noise 3 mV rms maximum
Settling time (to .01%FS) 10 V output step,
(R
L
=5 kΩ, C
L
=200 pf)
5 µS
Slew rate 10 V/µs
Gain error ±0.01% of FSR
Zero error ±0.0045 V maximum
INL < 2 LSBs
DNL < 1 LSB
Offset error drift ±10 ppm/°C
Gain error drift ±10 ppm/°C