Measurement Computing USB-1602HS-2AO - Manual (Page 13)

USB-1602HS-2AO User's Guide Installing the USB-1602HS-2AO
13
Cabling
Use a CA-68-3R 68-pin ribbon expansion cable (Figure 2), or a CA-68-3S (3-foot) or CA-68-6S (6-foot) 68-pin
shielded expansion cable (Figure 3) to connect signals to the USB-1602HS-2AO's 68-pin SCSI connector.
Figure 2. CA-68-3R cable
Figure 3. CA-68-3S and CA-68-6S shielded cable
Details on these cables are available at www.mccdaq.com/usb-data-acquisition/USB-1604HS-2AO.aspx .
Field wiring and signal termination
You can use the following Measurement Computing screw terminal board to terminate field signals and route
them into the USB-1602HS-2AO board using the CA-68-3R, CA-68-3S, or CA-68-6S cable:

TB-102 : Termination board with screw terminals. Details on this product are available on our web site at
www.mccdaq.com/products/screw_terminal_bnc.aspx .
A 19-inch rack mount kit ( RM-TB-102) for the TB-102 termination board is also available.