The rooms menus – Leprecon Litescape dimmer User Manual

Page 77

Comprehensive Menu Reference for Litescape™ LWD-2400 Dimmer

Litescape User’s Manual, Page 61

To enable modification of all programmable features, set this field to “Open”. When programming is
complete or whenever it is desirable to lockout any undesired tampering, set this field to “Closed”.

The Rooms Menus

FUTURE

SELECT ROOM

ROOM ZONE >
room 1 zone 1

DOWN

SELECT ZONE

ROOM ZONE >
room 1 zone 1

SELECT PRESET

ROOM PRESET >
room 1 pres 1

SELECT ROOM

ROOM ZONE >
room 4 zone 1

ENTER

SELECT ZONE

ROOM ZONE >
room 1 zone 2

EDIT ROOM NAME

ROOM ZONE >
room 4 zone 1

EDIT ROOM NAME

ROOM ZONE >
room 4 zone 1

EDIT ZONE PROGRAM MODE

ZONE PROGRAM
MODE: view

EDIT ZONE NAME

ROOM ZONE >
room 2 zone 1

DOWN

EDIT ZONE PROGRAM MODE

ZONE PROGRAM
MODE: edit

DOWN

ENTER

EDIT PRESET NAME

ROOM PRESET >
room 1 pres 2

ENTER

8 times

EDIT PRESET LEVELS

CHAN: 1 2 3
ZONE:100 0 0

DOWN

EDIT PRESET LEVELS

CHAN: 1 2 3
LEV: 99 0 0

SELECT WALL

ROOM |cl| WALL
room 1 room 2

DOWN

SELECT WALL

ROOM |cl| WALL
room 1 room 3

ENTER

SELECT WALL

ROOM |cl| WALL
room 1 room 3

DOWN

CHANGE WALL STATE

ROOM op WALL
room 1 room 3

EDIT ZONE LEVELS

CHAN: 1 2 3
LEV:100 0 0

DOWN

EDIT ZONE LEVELS

CHAN: 1 2 3
LEV: 99 0 0

DOWN

EDIT ZONE PROGRAM MODE

ZONE PROGRAM
MODE: snapshot

EDIT PRES PROGRAM MODE

PRESET PROGRAM
MODE: view

DOWN

EDIT PRES PROGRAM MODE

PRESET PROGRAM
MODE: edit

DOWN

EDIT PRES PROGRAM MODE

PRESET PROGRAM
MODE: snapshot

The Room Sub Menus

Select Room, Edit Room Name

Upon initialization, ROOMS are given default names. These menus are used to modify the names to be
more descriptive for the particular installation.

Press UP or DOWN to select the ROOM name to modify, then press ENTER to begin editing the name.

Select the character to edit by pressing NEXT and PREV. Change the currently highlighted character by
pressing the UP and DOWN keys. Changes are instantaneous, it is not necessary to press ENTER.

Select Zone, Edit Zone Name, Edit Zone Program Mode, Edit Zone Output Levels

Upon initialization, ZONES are given default names and CHANNEL output levels. These menus are used
to modify the names and levels for the particular installation.

Press UP or DOWN to select the ZONE to work with, then press ENTER to begin editing the name.

Select the character to edit by pressing NEXT and PREV. Change the currently highlighted character by
pressing the UP and DOWN keys. Changes are instantaneous, it is not necessary to press ENTER. Press
NEXT as required to move to the right and get to the PROGRAM MODE select screen.

This manual is related to the following products:

LWD-2400