Leprecon Litescape dimmer - Manual (Page 67)

Comprehensive Menu Reference for Litescape™ LWD-2400 Dimmer
Litescape User’s Manual, Page 51
Selecting a Sub Menu
Line two presents the various submenu choices. Use the NEXT and PREV buttons to highlight the area of
interest on line two, then press ENTER to proceed to the sub menu. The general types of parameters
which are available for viewing or modification in the various sub menus is described briefly next:
dimmers Select this field to view or change the name a WALL DIMMER, to modify it’s BASE
ADDRESS, or to change the CURVE characteristics for individual dimmer CHANNELS.
scenes Select this field to view or change the attributes of the up-to 100 SCENES. Attributes
associated with SCENES include STATE, FADE TIME, DELAY TIME, NEXT LINK, and
CHANNEL LEVELS.
trigger Select this field to view or change the attributes of the up-to 100 TRIGGERS. Attributes
associated with TRIGGERS include TRIGGER TYPE, ACTION, EVENT, DMX LEVEL,
and TIME OF DAY.
status Select this field to view various system STATUS variables, including DMX,
TEMPERATURE, and LINE VOLTAGE.
system Select this field to view or change the various SYSTEM related variables, such as
DEFAULT FADE TIMES. It is also possible to initialize the SYSTEM parameters to their
default condition. This includes DIMMERS, ROOMS, ZONES, SCENES and ALL.
rooms Select this field to view or change attributes of ROOMs, including channel assignments
for ZONES and PRESETS.
The Dimmer Menus
RIGHT
DIMMER SELECT
NEXT
DOWN
ENTER PREV
UP
SELECT DIMMER:
dimmer1 dimmer2
DIMMER SELECT
NEXT
DOWN
ENTER PREV
UP
SELECT DIMMER:
dimmer1 dimmer2
LEFT
ENTER
TO EDIT
dimmer1
ENTER
TO EDIT
dimmer2
RIGHT
DIMMER SELECT
NEXT
DOWN
ENTER PREV
UP
SELECT DIMMER:
dimmer2 dimmer3
LEFT
ENTER
TO EDIT
dimmer3
RIGHT
DIMMER SELECT
NEXT
DOWN
ENTER PREV
UP
SELECT DIMMER:
dimmer3 dimmer4
LEFT
ENTER
TO EDIT
dimmer4
RIGHT
LEFT
X
The Dimmer Select Menu
Dimmer Select Menu
The DIMMER SELECT menu is show above. Pressing PREV and NEXT cycles through all available,
recognized WALL DIMMERS (up-to 4). Pressing ENTER will select the dimmer for viewing or editing, as
shown next. To return to the
MAIN MENU, press ENTER again without pressing any other button, or
refrain from pressing any button for about 5 seconds.