Legrand DRD6 v2 - Manual (Page 2)

more sCenes
Up to 15 scenes are available per room. Each room level controller can access a
set of 5 scenes. The DRD6 is assigned to scenes 1-5 when shipped. Changing to
scene set 6-10 lets you record 5 more scenes; changing to scene set 11-15 lets
you record another 5 scenes. Binding three room level controllers (MRH6G or
DRD6) to the room and assigning each to a different scene set, lets you dedicate
a controller to each scene set. You can bind more room scene controllers to the
room to control the same scenes from multiple locations.
All room scene controllers that have the same scene set assignment operate the
5 scenes in the same way as all other room scene controllers programmed for the
same set. Scene buttons on controllers with scene sets 6-10 and 11-15 default to
0%/All room devices OFF. Use ROOM BINDING and CUSTOMIZING OPERATION
procedures to set up the additional scene controllers.
To assign scenes 6-10, simultaneously press and B until
the LED blinks twice (about 2 seconds).
To assign scenes 11-15, simultaneously press and C
until the LED blinks twice (about 2 seconds).
To change the assignment back to scenes 1-5,
simultaneously press and button a until the LED blinks
twice (about 2 seconds).
a = 1-5 (default) B = 6-10 C = 11-15
LoCk room ConFiguration
The Lock Configuration function operates from a wireless Miro room level
controller, and prevents the Miro wireless devices in the room from being
reprogrammed. Other operations such as dimming, switching and scene recall
are not affected.
When the configuration is locked, if is pressed and held on any Miro wireless
device, the device’s LED flashes red and the command is ignored.
to lock the configuration:
Go to any room scene controller. Simultaneously press
and buttons B and e until the LED flashes (about
2 seconds) to toggle in and out of Lock Configuration.
• If the mode changes from unlocked to locked,
the LED flashes red for 2 seconds, indicating that
configuration is now locked.
• If the mode changes from locked to unlocked, the
LED flashes green for 2 seconds, indicating that
configuration is now unlocked.
Assigning the DRD6
for scene set 11-15