Operating an adorne wireless lighting system, Operating the system – Legrand ADWHRM4 adorne Wireless User Manual

Page 11

Operating an adorne Wireless Lighting System

RF Lighting Control Key Fob
When pressed by the user, the Key Fob buttons recall room or house scenes or activate the panic feature
(flashing lights). Specific button functions are defined during system setup. The device may be locked to
prevent inadvertent reset to factory defaults. No auxiliary interfaces are required. An unlimited number of
Key Fobs can be added to any existing adorne Wireless Lighting installation.

Using adorne Wireless Lighting Room and

House Remote Controls

Room and House Remote Controls have a paddle on the right and four scene buttons on the left. House
Remote Controls look like Room Remote Controls, with the difference being the house icon on the face.

OPERATING THE SYSTEM

Button 1

HOUSE Scene 1

Button 2

HOUSE Scene 5 (default is off)

Button 3

HOUSE off

Panic

HOUSE Scene 5 (default is off)

MODE 1

MODE 2

MODE 3

SCENE BUTTONS
Default operation

Tap Button 1 once: Dimmers to 100% / Switches to On
Tap Button 2 once: Dimmers to 75% / Switches to On
Tap Button 3 once: Dimmers to 50% / Switches to On
Tap Button 4 once: Dimmers to 25% / Switches to On

User-defined scenes

Press and hold: Saves the current device settings as the scene

that is recalled the next time you tap this button.

Paddle

+ Tap once: Raise all devices to 100% (ON)
+ Press and hold: Raise the current scene’s level
- Press and hold: Lower the current scene’s level
- Tap once: Lower all room devices to 0% (OFF)

Tap button 1, 2 or 3 to

recall the appropriate lighting level.

Room Remote Controls
Room Remote Controls allow you to control all adorne Wireless Lighting devices or GROUPS in a room,
adjust light levels, and turn devices on or off. Use the Plus (+) and Minus (-) on the paddle to control
the device, or use Scene buttons for 25% (Button 4, bottom), 50% (Button 3), 75% (Button 2), and 100%
(Button 1, top) levels.

House Remote Controls
House Remote Controls provide the same functionality as Room Remote Controls but affect lights
throughout the house versus in a single room.