Legrand OFR Series Overfloor Raceway Device Boxes - Manual (Page 2)

2
6. Attach device box cover using (4)
#8-32 round head screws.
If raceway is to extend beyond the device box, follow the following steps
for altering the device box to accept a second section of raceway.
7. Remove base extension from base.
This part is no longer needed.
8. Remove breakaway tab on end of divider.
9. Remove breakaway tab on end of cover. First
break corners as shown in 9A. Second twist the
center of the tab 9B until it breaks free.
10. Complete installation using steps 1 trough 6.
9A
9A
9B