Legrand OFR Series Overfloor Raceway Transition Fittings - Manual (Page 7)

7
Slide raceway base onto End Fitting connecting tabs and
tighten #8-32 screws to secure.
Retirez les plaques d'adaptateur de conduite de la base de
Vista Point5.
Retire las placas del adaptador de tubos de la base de Vista
Point5.
3
For power feed, or as needed, attach flexible
conduit to feed plate using an appropriate fitting.
Retirez les plaques d'adaptateur de conduite de
la base de Vista Point5.
Retire las placas del adaptador de tubos de la
base de Vista Point5.
4
Slide fitting base into opening in wall, until the fitting base
comes in contact with the wall. Secure the raceway base
using #8 fasteners.
Retirez les plaques d'adaptateur de conduite de la base de
Vista Point5.
Retire las placas del adaptador de tubos de la base de Vista
Point5.
5
Attach raceway cover.
Retirez les plaques d'adaptateur de conduite de la base
de Vista Point5.
Retire las placas del adaptador de tubos de la base de
Vista Point5.
6
Attach end fitting cover using 4 #8-32 screws.
Retirez les plaques d'adaptateur de conduite de la base
de Vista Point5.
Retire las placas del adaptador de tubos de la base de
Vista Point5.
7