Legrand OFR Series Overfloor Raceway Transition Fittings - Manual (Page 6)

6
In-Wall Entrance Fitting (OFR10IW)
Raccord de transition Vista Point5 (OFR-VL)
Accesorios de transición Vista Point5 (OFR-VL)
Install Power Feed Plate and Divider into fitting Base.
Fitting is provided with a 1 channel and a 2 chan-
nel Power Feed Plate. The Power Feed Plate can be
installed on either side of the fitting base.
Retirez le panneau d'accès inférieur de Vista Point5.
Retire el panel de acceso inferior del Vista Point5.
1
Cut 4 1/2" H x 7 1/4" W [114mm x 184mm]
opening at base of wall.
Retirez les plaques d'adaptateur de conduite de
la base de Vista Point5.
Retire las placas del adaptador de tubos de la
base de Vista Point5.
2
One Channel Feed
Divider
Fitting Base
Power Feed Plate
Two Channel Feed
Divider
Fitting Base
Power Feed Plate