KIP PrintPro - Manual (Page 97)

KIP Print Pro User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2015 KIP. v1
- 90 -
Step Action Illustration
5. Select the desired settings that
will be applied to the LRP
queue for all files that are sent
to it to be printed.
For this example this will be
kept simple. This will be
configured to print 2 copies.
6. Select the Save Icon in the
Templates button.
This will prompt for a Input
name (this will be the Queue
Name)
Here the Queue Name is set to
IPS2.
When LPR is used to send files
to the KIP Printer anything sent
to IPS2 will produce 2 sheets at
100%.