KIP PrintPro - Manual (Page 67)

KIP Print Pro User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2015 KIP. v1
- 60 -
Step Action Illustration
10. Rotation for Portrait – allows for the
setting of a rotation for Portrait
documents.
11. Rotation for Landscape – allows for
the setting of a rotation for
Landscape documents.
12. Minimum width or short edge
Maximum width or short edge
Minimum Length or long edge
Maximum Length or long edge
Note: This configures the Minimum
& Maximum for X&Y so that the
software knows what size the
drawing is and what roll size/fold
packet/allignment/rotation/snap
length/intercopy delay are
applied.
13. Snap to Cut Length - Add blank
paper to the trailing edge of the
copy.
Note: For this example this setting
is not used.
14. Inter Copy Delay - in tenth of a
second for fast printers or when
tab applicator option is used.
Note: For this example this setting
is not used.