KIP PrintPro - Manual (Page 65)

KIP Print Pro User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2015 KIP. v1
- 58 -
Step Action Illustration
5. Folding Table – This area is
where all settings for the Fold
Parameters are made.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
The Folding Table Icon Explained:
1. Media Width
2. Fold Packet
3. Title Block Location (Used when Title Block Recognition is checked)
4. Alignment – Used to shift the image Left, Center, Right when the image is smaller than
the paper size.
5. Rotation – For Portrait View
6. Rotation – For Landscape View
7. Minimum Width / Short Edge (see note)
8. Maximum Width / Short Edge (see note)
9. Minimum Length/ long Edge (see note)
10. Maximum Length / Long Edge (see note)
11. Snap to Cut Length – Add blank paper to the trailing edge of the copy.
12. Inter Copy Delay – in tenth of a second for fast printers or when tab applicator option is
used.
Note: For #’s 7, 8 9, 10 – This configures the Minimum & Maximum for X&Y so that the software
knows what size the drawing is and what roll size/fold packet/allignment/rotation/snap
length/intercopy delay are applied.